Identify All Material Possible Options
We provide commonly used plastics and metals, including ABS, POM, aluminum, and stainless steel, supported by CNC Machining and Sheet Metal. Our manufacturing solutions ensure precision, consistency, and efficiency from prototyping to mass production.
Choose Material Below
| Aluminum Alloy Grade (International) | European Grade (EN) | Typical Applications | Physical Properties | Chemical Properties | Price | Machining Difficulty |
|---|---|---|---|---|---|---|
| 1050 | EN AW-1050A | Electrical parts, reflective panels | Very low strength, excellent ductility | Very high purity aluminum (≥99.5%) | ★★☆☆☆ | ★☆☆☆☆ |
| 1060 | EN AW-1060 | Heat exchangers, chemical equipment | Low strength, good thermal conductivity | High purity aluminum (≥99.6%) | ★★☆☆☆ | ★☆☆☆☆ |
| MIC-6 | EN AW-5083 (Cast Tooling Plate) | Tooling plates, jigs, fixtures | Excellent flatness, high dimensional stability | Cast aluminum with stress-relieved structure | ★★★★☆ | ★★☆☆☆ |
| 5052 | EN AW-5052 | Sheet metal parts, enclosures | Good strength, excellent formability | Excellent corrosion resistance, Mg alloy | ★★☆☆☆ | ★★☆☆☆ |
| 5083 | EN AW-5083 | Marine structures, pressure vessels | High strength, excellent toughness | Outstanding seawater corrosion resistance | ★★★☆☆ | ★★★☆☆ |
| 6061 | EN AW-6061 | Structural parts, frames, housings | Medium strength, good machinability | Good corrosion resistance, Mg-Si alloy | ★★★☆☆ | ★★☆☆☆ |
| 6063 | EN AW-6063 | Profiles, extrusions, architectural parts | Lower strength, excellent surface finish | Good corrosion resistance, Mg-Si alloy | ★★☆☆☆ | ★★☆☆☆ |
| 6082 | EN AW-6082 | Machinery parts, load-bearing structures | Higher strength than 6061 | Good corrosion resistance, Mg-Si alloy | ★★★☆☆ | ★★★☆☆ |
| 2024 | EN AW-2024 | Aerospace structures, precision parts | High strength, good fatigue resistance | Lower corrosion resistance, Cu-based alloy | ★★★☆☆ | ★★★★☆ |
| 7075 | EN AW-7075 | Aerospace, high-load mechanical parts | Very high strength, low ductility | Lower corrosion resistance, Zn-based alloy | ★★★★☆ | ★★★★☆ |
| Stainless Steel Grade (International) | European Grade (EN) | Typical Applications | Physical Properties | Chemical Properties | Price | Machining Difficulty |
|---|---|---|---|---|---|---|
| AISI 301 | 1.4310 | Springs, clips, flexible structural parts | High strength after cold working, excellent elasticity | Good corrosion resistance, austenitic structure | ★★★☆☆ | ★★★☆☆ |
| AISI 304 | 1.4301 | Food equipment, enclosures, general industrial parts | Good strength, excellent formability | Excellent corrosion resistance, non-magnetic | ★★★☆☆ | ★★☆☆☆ |
| AISI 304L | 1.4307 | Welded structures, chemical containers | Slightly lower strength, good toughness | Improved weld corrosion resistance (low carbon) | ★★★☆☆ | ★★☆☆☆ |
| AISI 316 | 1.4401 | Marine, chemical, medical components | Higher strength, good high-temperature performance | Superior corrosion resistance, Mo-added | ★★★★☆ | ★★★☆☆ |
| AISI 316L | 1.4404 | Valves, pharmaceutical and marine parts | Good toughness, stable mechanical properties | Excellent resistance to pitting and crevice corrosion | ★★★★☆ | ★★★☆☆ |
| AISI 430 | 1.4016 | Decorative panels, household appliances | Moderate strength, good thermal conductivity | Fair corrosion resistance, ferritic structure | ★★☆☆☆ | ★★☆☆☆ |
| AISI 201 | 1.4372 | Structural components, cost-driven products | High strength, lower ductility | Moderate corrosion resistance, Mn-substituted Ni | ★★☆☆☆ | ★★★☆☆ |
| AISI 420 | 1.4021 | Shafts, cutting tools, wear-resistant parts | High hardness after heat treatment | Moderate corrosion resistance, martensitic | ★★★☆☆ | ★★★★☆ |
| AISI 17-4PH | 1.4542 | Aerospace, high-strength mechanical parts | Very high strength, good fatigue resistance | Good corrosion resistance, precipitation-hardened | ★★★★☆ | ★★★★☆ |
| Steel Grade (International) | European Grade (EN) | Typical Applications | Physical Properties | Chemical Properties | Price | Machining Difficulty |
|---|---|---|---|---|---|---|
| AISI 1008 | EN 1.0201 (DC01) | Sheet metal parts, enclosures | Very low strength, excellent formability | Ultra-low carbon steel | ★★☆☆☆ | ★☆☆☆☆ |
| AISI 1018 | EN 1.0401 (C15) | Shafts, pins, machined parts | Low strength, good ductility | Low carbon steel | ★★☆☆☆ | ★★☆☆☆ |
| AISI 1020 | EN 1.0402 (C22) | Welded structures, brackets | Low–medium strength, good weldability | Low carbon steel | ★★☆☆☆ | ★★☆☆☆ |
| AISI 1045 | EN 1.0503 (C45) | Gears, shafts | Medium strength, good wear resistance | Medium carbon steel | ★★☆☆☆ | ★★★☆☆ |
| AISI A36 | EN 1.0038 (S235JR) | Frames, base plates | Low strength, good toughness | Structural carbon steel | ★★☆☆☆ | ★★☆☆☆ |
| AISI 4130 | EN 1.7218 (25CrMo4) | Tubes, aerospace parts | High strength, good fatigue resistance | Cr-Mo alloy steel | ★★★☆☆ | ★★★☆☆ |
| AISI 4140 | EN 1.7225 (42CrMo4) | High-load shafts, tooling | High strength, excellent toughness | Cr-Mo alloy steel | ★★★☆☆ | ★★★★☆ |
| AISI 4340 | EN 1.6582 (34CrNiMo6) | Heavy-duty gears | Very high strength, long fatigue life | Ni-Cr-Mo alloy steel | ★★★★☆ | ★★★★☆ |
| AISI 8620 | EN 1.6523 (20MnCr5) | Gears, cams | Tough core, carburized surface | Low carbon alloy steel | ★★★☆☆ | ★★★☆☆ |
| Tool Steel O1 | EN 1.2510 | Punches, cutters | High hardness, stable | Oil-hardening tool steel | ★★★☆☆ | ★★★★☆ |
| Tool Steel D2 | EN 1.2379 | Dies, wear parts | Very high hardness, wear resistant | High C, high Cr steel | ★★★★☆ | ★★★★★ |
| Tool Steel H13 | EN 1.2344 | Die casting molds | High hot strength | Cr-Mo-V hot work steel | ★★★★☆ | ★★★★☆ |
| Tool Steel P20 | EN 1.2311 | Injection molds | Pre-hardened, good machinability | Ni-Cr-Mo mold steel | ★★★☆☆ | ★★★☆☆ |
| Spring Steel 1075 | EN 1.1248 (C75S) | Springs, clips | High elasticity | High carbon spring steel | ★★☆☆☆ | ★★★☆☆ |
| Bearing Steel 52100 | EN 1.3505 | Bearings, rollers | Extremely high hardness | High C chromium steel | ★★★☆☆ | ★★★★☆ |
| Titanium Alloy Grade (International) | European Grade (EN) | Typical Applications | Physical Properties | Chemical Properties | Price | Machining Difficulty |
|---|---|---|---|---|---|---|
| Grade 1 | EN 3.7025 | Chemical equipment, heat exchangers | Low strength, excellent ductility | Excellent corrosion resistance, pure Ti | ★★★★☆ | ★★★☆☆ |
| Grade 2 | EN 3.7035 | Aerospace, marine, medical parts | Medium strength, good formability | Outstanding corrosion resistance | ★★★★☆ | ★★★☆☆ |
| Grade 5 (Ti-6Al-4V) | EN 3.7165 | Aerospace, medical implants | Very high strength, low density | Excellent corrosion and fatigue resistance | ★★★★★ | ★★★★★ |
| Grade 9 (Ti-3Al-2.5V) | EN 3.7195 | Tubes, bicycle frames, aerospace | High strength, good toughness | Good corrosion resistance | ★★★★☆ | ★★★★☆ |
| Grade 12 | EN 3.7105 | Chemical processing equipment | Medium–high strength, good weldability | Excellent crevice corrosion resistance | ★★★★☆ | ★★★★☆ |
| Grade 23 (Ti-6Al-4V ELI) | EN 3.7164 | Medical implants, aerospace parts | Very high strength, excellent toughness | Extra-low interstitials, biocompatible | ★★★★★ | ★★★★★ |
| Plastic Material (International) | European Standard | Typical Applications | Physical Properties | Chemical Properties | Price | Machining Difficulty |
|---|---|---|---|---|---|---|
| ABS | EN ISO 2580 | Housings, consumer products | Good impact strength, easy to machine | Moderate chemical resistance | ★★☆☆☆ | ★★☆☆☆ |
| POM (Acetal) | EN ISO 9988 | Gears, precision components | High stiffness, low friction | Excellent solvent resistance | ★★★☆☆ | ★★☆☆☆ |
| PA6 (Nylon 6) | EN ISO 1874 | Bushings, mechanical parts | Good toughness, wear resistant | Good oil and chemical resistance | ★★☆☆☆ | ★★★☆☆ |
| PA66 (Nylon 66) | EN ISO 1874 | Gears, structural components | Higher strength than PA6 | Good chemical resistance | ★★★☆☆ | ★★★☆☆ |
| PC (Polycarbonate) | EN ISO 7391 | Transparent covers, guards | High impact strength, transparent | Moderate chemical resistance | ★★★☆☆ | ★★★☆☆ |
| PMMA (Acrylic) | EN ISO 7823 | Optical parts, display panels | Excellent clarity, rigid | Poor solvent resistance | ★★☆☆☆ | ★★★☆☆ |
| PEEK | EN ISO 1043 | Aerospace, medical components | Very high strength, heat resistant | Excellent chemical resistance | ★★★★★ | ★★★★☆ |
| PTFE (Teflon) | EN ISO 12086 | Seals, insulators | Very low friction, soft | Outstanding chemical inertness | ★★★★☆ | ★★★☆☆ |
| PVC | EN ISO 1452 | Pipes, enclosures | Good rigidity, flame retardant | Good chemical resistance | ★★☆☆☆ | ★★☆☆☆ |
| UHMW-PE | EN ISO 11542 | Wear strips, guides | Excellent abrasion resistance | Excellent chemical resistance | ★★★☆☆ | ★★☆☆☆ |
Material Testing & Quality Assurance
Spectrometer
Spectrometer analysis accurately identifies metal composition and alloy grades. This process prevents material mix-ups and ensures all raw materials comply with international standards before machining and production.
Hardness Testing
Verifies the effectiveness of heat treatment and material hardness. By measuring surface and core hardness values, we ensure parts meet performance requirements for their intended applications.
Mechanical Property
Mechanical testing assesses tensile strength, yield strength, and elongation. These tests verify the structural reliability and load-bearing capability of metal and plastic components in real-world applications.
Flame-Retardant
Flame-retardant testing evaluates the fire resistance of plastic materials. It confirms compliance with safety standards and ensures materials maintain stable performance in high-temperature or flame-exposure environments.
Certification
Material Certification We Provide
With complete material certification and testing support, we ensure full traceability, verified performance, and consistent quality—giving customers confidence in every material and every part delivered.
Mill Test Certificate (MTC / EN 10204 3.1)
Issued by the raw material manufacturer, confirms chemical composition and mechanical properties, ensure full traceability, compliance with international material standards.
In-House Inspection Report
Generated from our internal testing, including spectrometer analysis, hardness testing, and dimensional inspection, to verify material identity and processing quality before delivery.
Third-Party Test Certificate
Provided by accredited laboratories upon request, covering chemical, mechanical, or flame-retardant testing to meet customer, regulatory, or industry-specific requirements.
ODM PARTS Gallery
Showcasing High-Quality Precision Components and Parts in Various Materials, Featuring Metals, Alloys, and Plastics, Manufactured and Supplied by ODM PARTS CO., LIMITED
Frequently Asked Questions
Answers to Common Questions About Material Selection, Material Testing and Certification
Q: What types of material certificates do you provide?
A: We provide chemical composition certificates, physical properties certificates, and third-party certification reports for metals and engineering plastics.
Q: What information is included in a material test report?
A: Reports may include chemical composition, hardness, tensile strength, impact toughness, elongation, flame-retardant performance, and other physical properties.
Q: How accurate is your spectrometer analysis?
A: Our handheld and benchtop spectrometers can detect trace elements with high precision, down to ppm levels, ensuring material compliance with specifications.
Q: Can you test flame-retardant plastics?
A: Yes, we test ABS, PC, PA, and other engineering plastics for flame-retardancy, thermal stability, and durability, and provide detailed reports.
Q: How do I know which processing method suits my material?
A: Based on hardness, tensile strength, and toughness data, we can recommend optimal processing methods such as CNC machining, sheet metal fabrication, extrusion, or injection molding.
Q: How long does it take to get a test report?
A: Standard testing is completed within 3–7 working days. Expedited services are available for urgent requirements.
Q: How is pricing determined?
A: Most of them are free. Pricing depends on material type, number of test items, and type of report required.
Q: Are your material certificates internationally recognized?
A: Yes, our certificates comply with ISO, ASTM, and EN standards and are recognized by international clients.
Q: What advantages does ODM PARTS CO., LIMITED offer?
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse varius enim in eros eleentum tristique. Duis cursus, mi quis viverra ornare, erosdolor interdum nulla, ut commodo diam libero vitae erat
Still have more questions?
If you have any further inquiries about material testing, certifications, or selecting the right materials for your project, our expert team at ODM PARTS CO., LIMITED is here to help. We can provide detailed guidance, customized testing solutions, and advice on optimal processing methods.
contact US